THIS MATERIAL IS A MARKETING COMMUNICATION.
Electric Vehicle Battery Materials: Separators
We have discussed cathode and anode materials in the electric vehicle (EV) battery supply chain. In this article, we would like to take a deep look at separator materials which are also an important part of EV batteries.
Separator Materials
A separator is a permeable membrane placed between a battery’s anode and cathode. The major function is to isolate cathode materials from anode materials to prevent short circuit while allowing for lithium ions to flow in the electrolyte between cathode and anode. Separators are a critical component in batteries as their structures and properties decide batteries’ performance which includes energy density, battery cycle life, safety, as well as cost.
Separator manufacturing is based on micropore preparation technology and products evolve with production process innovation. Separators are usually produced via a dry or wet process, as well as coated separator by wet process. Exhibit 2 shows the difference between dry and wet processes. To summarize the table, it is a tradeoff between cost and properties given knowhow is no longer a constraint, just as many other manufacturing businesses. What drives the emergence of wet process is mainly the pursuit for higher energy density with thinner separators. Coated separator is one step further by coating ceramic base, polyvinylidene fluoride (PVDF), aramid and other adhesives on traditional wet separator base film in order to improve thermal stability and prolong the lifespan of separators, especially for high nickel batteries.
Nature of the Business
Separator manufacturing is a typical fine manufacturing business with four major inputs, namely raw materials, equipment, power and labor. Take a leading separator company, Yunnan Energy New Materials (YENM), as an example. Raw materials take up 57% of the total production cost, followed by manufacturing cost (equipment depreciation and amortization) at 20%, power at 16% and labor cost at 6%.1 Raw materials are polythene (PE) for wet separators and polypropylene (PP)/PE for dry separators. PE and PP are commodities produced mainly in Japan, Korea and the US. Japan Steel Works (JSW) is one of the key equipment manufacturers providing the whole automatic production line with great consistency and stability. Most of the Japanese and Chinese separator makers use JSW products. There are some Chinese equipment makers that produce dry separators, but generally speaking, Japan is taking the lead. Since battery makers have a high requirement on separators’ consistency and stability, most of the manufacturing process is done by machines automatically, which means separator manufacturing is not a labor intensive industry. It also explains why this sector is not dominated by Chinese players who usually have the cost advantage of cheap labor, but no such advantage of equipment or raw materials. Exhibit 3 shows the current competition landscape of separator industry.
Future for Separators
Separator innovation has been slowly accompanying the changes of cathode and anode materials as well as EV battery cells. Cheap coated separator with specific properties to electrodes are one of the directions in the future, as battery makers strive for higher energy density. For example, separators coated with polymeric substances have become widely used in the so-called semi-solid batteries. They can help keep good lithium ion conductivity through the holes while the electrical insulation and electrochemistry properties are stable. However, the separator sector is also facing challenges from solid-state batteries that do not need separators. Though solid-state batteries are still far from mass production, we will keep a close eye on its development and the impact to the separator sector.
1 Source: YENM annual report, 2020
Disclaimer & Information for Investors
No distribution, solicitation or advice: This document is provided for information and illustrative purposes and is intended for your use only. It is not a solicitation, offer or recommendation to buy or sell any security or other financial instrument. The information contained in this document has been provided as a general market commentary only and does not constitute any form of regulated financial advice, legal, tax or other regulated service.
The views and information discussed or referred in this document are as of the date of publication. Certain of the statements contained in this document are statements of future expectations and other forward-looking statements. Views, opinions and estimates may change without notice and are based on a number of assumptions which may or may not eventuate or prove to be accurate. Actual results, performance or events may differ materially from those in such statements. In addition, the opinions expressed may differ from those of other Mirae Asset Global Investments’ investment professionals.
Investment involves risk: Past performance is not indicative of future performance. It cannot be guaranteed that the performance of the Fund will generate a return and there may be circumstances where no return is generated or the amount invested is lost. It may not be suitable for persons unfamiliar with the underlying securities or who are unwilling or unable to bear the risk of loss and ownership of such investment. Before making any investment decision, investors should read the Prospectus for details and the risk factors. Investors should ensure they fully understand the risks associated with the Fund and should also consider their own investment objective and risk tolerance level. Investors are advised to seek independent professional advice before making any investment.
Sources: Information and opinions presented in this document have been obtained or derived from sources which in the opinion of Mirae Asset Global Investments (“MAGI”) are reliable, but we make no representation as to their accuracy or completeness. We accept no liability for a loss arising from the use of this document.
Products, services and information may not be available in your jurisdiction and may be offered by affiliates, subsidiaries and/or distributors of MAGI as stipulated by local laws and regulations. Please consult with your professional adviser for further information on the availability of products and services within your jurisdiction. This document is issued by Mirae Asset Global Investments (HK) Limited and has not been reviewed by the Securities and Futures Commission.
Information for EU investors pursuant to Regulation (EU) 2019/1156: This document is a marketing communication and is intended for Professional Investors only. A Prospectus is available for the Mirae Asset Global Discovery Fund (the “Company”) a société d'investissement à capital variable (SICAV) domiciled in Luxembourg structured as an umbrella with a number of sub-funds. Key Investor Information Documents (“KI(I)Ds”) are available for each share class of each of the sub-funds of the Company.
The Company’s Prospectus and the KI(I)Ds can be obtained from www.am.miraeasset.eu/fund-literature . The Prospectus is available in English, French, German, and Danish, while the KI(I)Ds are available in one of the official languages of each of the EU Member States into which each sub-fund has been notified for marketing under the Directive 2009/65/EC (the “UCITS Directive”). Please refer to the Prospectus and the KI(I)D before making any final investment decisions.
A summary of investor rights is available in English from www.am.miraeasset.eu/investor-rights-summary/.
The sub-funds of the Company are currently notified for marketing into a number of EU Member States under the UCITS Directive. FundRock Management Company can terminate such notifications for any share class and/or sub-fund of the Company at any time using the process contained in Article 93a of the UCITS Directive.
Hong Kong: It is intended is for Hong Kong investors. Before making any investment decision to invest in the Fund, Investors should read the Fund’s Prospectus and the information for Hong Kong investors (of applicable) of the Fund for details and the risk factors. The individual and Mirae Asset Global Investments (Hong Kong) Limited may hold the individual securities mentioned. This document is issued by Mirae Asset Global Investments (HK) Limited and has not been reviewed by the Securities and Futures Commission.
Singapore: It is not intended for general public distribution. The investment is designed for Institutional investors and/or Accredited Investors as defined under the Securities and Futures Act of Singapore. This document is issued by Mirae Asset Global Investments (HK) Limited and has not been reviewed by the Monetary Authority of Singapore. Please consult with your professional adviser for further information on the availability of products and services within your jurisdiction.
Australia: The information contained in this document is provided by Mirae Asset Global Investments (HK) Limited (“MAGIHK”), which is exempted from the requirement to hold an Australian financial services license under the Corporations Act 2001 (Cth) (Corporations Act) pursuant to ASIC Class Order 03/1103 (Class Order) in respect of the financial services it provides to wholesale clients (as defined in the Corporations Act) in Australia. MAGIHK is regulated by the Securities and Futures Commission of Hong Kong under Hong Kong laws, which differ from Australian laws. Pursuant to the Class Order, this document and any information regarding MAGIHK and its products is strictly provided to and intended for Australian wholesale clients only. The contents of this document is prepared by Mirae Asset Global Investments (HK) Limited and has not been reviewed by the Australian Investments & Securities Commission.
Swiss investors: This document is intended for Professional Investors only. This is an advertising document. The Swiss Representative is 1741 Fund Solutions AG, Burggraben 16, CH-9000 St. Gallen. The Swiss Paying Agent is Tellco AG, Bahnhofstrasse 4, CH-6431 Schwyz. The Prospectus and the Supplements of the Funds, the KI(I)Ds, the Memorandum and Articles of Association as well as the annual and interim reports of the Company are available free of charge from the Swiss Representative.
UK investors: This document is intended for Professional Investors only. The Company is a Luxembourg registered UCITS, recognised in the UK under section 264 of the Financial Services and Markets Act 2000. Compensation from the UK Financial Services Compensation Scheme will not be available in respect of the Fund. The taxation position affecting UK investors is outlined in the Prospectus. This document has been approved for issue in the United Kingdom by Mirae Asset Global Investments (UK) Ltd, a company incorporated in England & Wales with registered number 06044802, and having its registered office at 4th Floor, 4-6 Royal Exchange Buildings, London EC3V 3NL, United Kingdom. Mirae Asset Global Investments (UK) Ltd. is authorised and regulated by the Financial Conduct Authority with firm reference number 467535.
Copyright 2024. All rights reserved. No part of this document may be reproduced in any form, or referred to in any other publication, without express written permission of Mirae Asset Global Investments (Hong Kong) Limited.